Technicolor - Thomson TV/DVD Manual de usuario descargar pdf (Pagina 28)

DVD

More info...

Select the connected equipment with the av key of the remote control. Press once for AV1, twice for AV2, or three times for AV3.

For some sources, the AV1 or AV2 selection is automatic (slow or fast switch).

Connections

READING RECORDING CALL

Device Socket Device Socket PROGRAMME

Video recorder Video recorder

SCART or SCART AV1

AV1 Camcorder AV2

Camcorder

Cinches Video recorder

SCART

or or

AV2

AV3

S-Video Camcorder

AV3

The AV1 socket (SCART input-output), located at the rear of the TV/DVD set, enables

you to connect another device ( VHS or 8 mm or DVHS video recorder,VHS or 8

mm camcorder, decoder, satellite receiver, DVD player, video games console or

equipment outputting an RGB signal).

The AV2 socket (SCART input / output) at the rear of the TV/DVD can be used to

connect a camcorder as well as an amplifier by means of a SCART-to-Cinch cable.

AV3 (cinch sockets and S socket: inputs only):

on the front or on the side of the TV/DVD

set.The cinch audio and video sockets enable you to connect a VHS or 8 mm camcorder.

The S socket and the cinch audio sockets enable you to connect a S-VHS or Hi 8

camcorder or a digital DVC camcorder.

Select the connected device with the av key of your remote control to display

AV3 on

the screen. Upon switching off of the connected device, the TV/DVD will remain on the AV3

programme. To return on a channel, enter its number with the remote control.

Headphones: connect stereo headphones or earphones to the

socket.According to

the models, you will or will not have to mute the loudspeakers with the key.Adjust

the sound with Vol + or - .

DVD output sockets

cinch socket, S socket and digital-audio socket: output only):

to the

rear of the TV/DVD set.

To connect a video recorder or a TV set, use either the cinch audio and video sockets, or

the S socket and cinch audio sockets.

The cinch audio sockets also enable you to connect a stereo amplifier, a Hi-Fi unit, a

Dolby Prologic amplifier/decoder.

The DIGITAL AUDIO socket enables you to connect a Dolby Digital (AC-3)

amplifier/decoder. Do not forget to check the type of sound in the Sound menu of the

DVD part (see page 15).

To copy a cassette: Connect the recording VCR on the AV2

scart socket. Connect the reading device on the AV1 scart socket

if it is a VCR or on the AV3 cinch sockets if it is a camcorder.

Connection of a video recorder (see diagram at the end of

the leaflet, inside the cover) - If you connect a video recorder to the

aerial socket, you will have to search and memorise the video

recorder modulator channel. Switch the video recorder on, insert a

recorded cassette to be read and search for images (see Chapter

“Completing set-up” on page 5).

Store at any programme ending with a 9 (9, 19, 29 etc...).

Each time you use the video recorder, switch to the programme

assigned to it.

AV1/AV2: in DVD mode, the signal output from the AV1 and AV2

sockets is identical to the display on the TV/DVD screen.

In TV mode, the signal output from the AV1 is always that of the

received channel.The signal output from the AV2 socket is identical

to the display on the TV/DVD screen.

In accordance with the DVD standard, your TV/DVD is equipped with a Copy Protection Device, which

can be triggered on and off by the DVD disc itself, in order to make any recording of the concerned DVD

disc onto a videotape of very poor picture quality, or even impossible.

“This product incorporates copyright protection technology that is protected by method claims of certain

U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is

intended for home use only unless otherwise authorized by Macrovision Corporation. Reverse engineering

or disassembly is prohibited.”

The player's digital audio (optical) output jack fully

comply with the international standard governing this type of

jack (IEC 958).It is designed exclusively for connection to a

Dolby Digital (AC-3) or a suitable decoder.

Do not use the Digital Audio Output jacks to connect to an

equipment other than a Dolby Digital (AC-3) or a suitable decoder.

Such a connection can create a high level of noise that may

be harmful to your ears, and could damage headphones or

speakers.

Older digital equipment, some of which are not fully compliant with

IEC 958, are likely to cause this problem.To avoid this drawback,

use the «audio-digital output» menu (see page 15) to convert the

Dolby Digital (AC–3) audio-digital output from bit to linear PCM

flux.

These sockets are located on the side.

AV3

Headphones

These sockets are located on the back of the

TV/DVD.

They deliver the video and audio

signals coming from the DVD player

part.

c20dGB7L 19/07/00 18:03 Page 21

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35

Comentarios a estos manuales

Sin comentarios

Technicolor - Thomson TV/DVD Manual de usuario Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Reproductores de dvd Technicolor - Thomson TV/DVD